Cleaning and maintenance of skirting line

Many things are not good only by quality, but also have to be able to use. Buy a good fruit knife. I don't know how to maintain it. It will become dull over time. The same is true for interior decoration. If you can't install it, it's over. The usual maintenance plays a very important role. If you want to increase the service life of the skirting line, maintenance is indispensable. Follow the skirting line manufacturer to see how the wooden skirting line is maintained.

1、 Pay attention to cleaning and maintenance after installation

For the skirting line after installation, if the glue mixing method is selected, the beginning of maintenance is to clean up the overflow glue. If you brush too little glue, the glue will overflow from the side when it is fixed. At this time, you can scrape off part of the overflow with a knife to prevent the glue from absorbing dust and forming dirt blocks, which will endanger the beauty and generosity.

2、 Clean up the dirt on the skirting line

After long-term application of skirting line, its surface will often be covered with greasy feeling and dirt, especially at the interface, which is very easy to hide dirt. At this time, it can be cleaned with a towel dipped in detergent or decontamination cream. For the gap between the foot lines, the old soft toothbrush can be used for cleaning.

3、 Maintenance of wooden skirting line

Wooden skirting lines are sensitive to dry or wet weather, and are very easy to crack or grow mold. Therefore, it is usually solved to carry out regular waxing or wiping waterproof coating maintenance for wooden skirting lines. In addition, note that wooden skirting lines cannot be installed in wet and cold areas.

4、 The skirting line is loose and removed

The looseness or falling of the skirting line may be caused by long-term immersion; It may also be because the key points of project construction are not guaranteed during project construction. For this matter, it can generally be solved by plastering or drilling. If the actual effect is not ideal, it can be removed, scraped and reassembled.